Happy new year everyone!

As I will be moving to new premises this year, we are looking to clear any large stock that has been left over from 2017.

All the EMV-25VBB's have been sold and we are now left with the last of the EML-290. The lathe (£2100) will be bundled with a wedge type quick change tool post (worth £150) and for another £100, I will throw in the stand. The drip tray is already included in the box. Of course the price include UK delivery! So for £2200 you can get your year off to a very good start!




The EML-290 boasts a massive 38mm (approx. 1.5″) spindle bore with a MT5 taper, 290mm swing over bed (11.4″) and 700mm (27.5″) between centres. Suffice to say, there is plenty of room for most workpieces on this machine.

As standard, the EML-290 comes with a full package of accessories: Fixed and travelling steadies, dead centres, face plate, 4 jaw chuck, all the tools you would need and of course the key to the CamLock chuck!

Screw cutting is a breeze with this machine as is facing off thanks to the integral screwcutting gearbox and the power crossfeed. The latter runs of a secondary shaft, just like on industrial machines.

This machine really does boast some other cool features too, for example it has a dovetailed cross-slide to allow fitment of a rear toolpost, or a vice! It is also ready to accept an auxiliary milling head too.

Obviously, no self respecting turner would tolerate anything less than a lever locking tailstock.


A DRO can also be supplied fitted or for retrofit upon request at extra cost.

Get in touch if you are interested!


Specs here:
https://emvioeng.com/shop/machine-to...wer-crossfeed/