1. #1
    Good morning,

    After visiting (the very knowledgable and welcoming) Clive over the weekend to see his CNC machines, and to discuss my own requirements, I have come to the conclusion that I may be out of my depth with self-building!

    I'm confident enough in finding/creating a suitable design, as well as purchasing the necessary components, but physically building the frame, drilling the holes accurately, attaching the guide rails and screws, mounting the gantry, and having everything aligned perfectly, etc, doesn't excite me very much.

    So, is there anyone out there, preferably based in North West, who would be interested in creating a frame and gantry for a CNC machine for me? I would like the size to be approx 800mm x 500mm, with a decent z-axis range.

    If anyone would like to contact me with a quote, then please do so. I'm ready to get going ASAP.

    Many thanks in advance

  2. The Following User Says Thank You to GREGGYMAC For This Useful Post:


Similar Threads

  1. BUILD LOG: Desktop type router - Fixed gantry - steel frame MK2
    By Tom J in forum DIY Router Build Logs
    Replies: 14
    Last Post: 02-01-2017, 09:32 PM
  2. Any thoughts on this design for a gantry setup?
    By Dwayne Dibbley in forum Machine Discussion
    Replies: 8
    Last Post: 05-02-2015, 08:49 PM
  3. BUILD LOG: 8x4 router build. Steel base & Aluminium gantry gantry
    By D-man in forum DIY Router Build Logs
    Replies: 54
    Last Post: 29-11-2014, 08:48 PM
  4. Setup for squaring twin X-axis gantry
    By routercnc in forum Gantry/Router Machines & Building
    Replies: 20
    Last Post: 26-03-2014, 11:13 PM
  5. BUILD LOG: 7' X 4' Steel frame build
    By Ricardoco in forum DIY Router Build Logs
    Replies: 6
    Last Post: 28-10-2012, 06:02 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •