Thread: roundbar stock

  1. hi

    I need to mill out some round bar for a project. How can i use Vetric to do this? There is no option to use round bar for stock.

  2. #2
    Does Vectric not let you use a solid model for your stock?
    You think that's too expensive? You're not a Model Engineer are you? :D

  3. Quote Originally Posted by magicniner View Post
    Does Vectric not let you use a solid model for your stock?
    ive not seen anyway of doing it within the software but i am pretty new to it.

  4. #4
    I know Vectric is used to engrave on 3D parts, I just Googled it, that means you have to be able to load a model of the part as stock, check the manual to see if the milling operations can be applied to stock loaded as a 3D model.
    Last edited by magicniner; 1 Week Ago at 02:25 PM.
    You think that's too expensive? You're not a Model Engineer are you? :D

  5. Quote Originally Posted by magicniner View Post
    I know Vectric is used to engrave on 3D parts, I just Googled it, that means you have to be able to load a model of the part as stock, check the manual to see if the milling operations can be applied to stock loaded as a 3D model.
    nice one ill look at that. Thank you for your help.

Similar Threads

  1. where to buy stock aluminium
    By dfox1787 in forum Marketplace Discussion
    Replies: 9
    Last Post: 3 Weeks Ago, 11:27 PM
  2. Aluminium stock (billet/plate)
    By Dangle_kt in forum Marketplace Discussion
    Replies: 8
    Last Post: 31-12-2016, 07:44 PM
  3. Metal Stock Purchasing UK
    By paul_m in forum Metalwork Discussion
    Replies: 7
    Last Post: 25-05-2015, 04:42 PM
  4. RFQ: RFQ: Keyslot milling in alu round stock.
    By Saracen in forum Projects, Jobs & Requests
    Replies: 2
    Last Post: 05-09-2013, 09:42 AM
  5. Method for holding Stock
    By Chaz in forum Machine Discussion
    Replies: 4
    Last Post: 24-06-2013, 11:41 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •