1. #1
    Hi Guys

    Im looking at installing limit switches on my cnc.

    Will 3 switches be enough on a 3 axis cnc? I know ideally i could do with 6 but there is no way for me to install a limit switch on the z- without loosing a small amount of work area on the x axis.

  2. #2
    Neale's Avatar
    Lives in Plymouth, United Kingdom. Last Activity: 20 Hours Ago Has been a member for 5-6 years. Has a total post count of 1,156. Received thanks 209 times, giving thanks to others 5 times.
    Limit switches at one end of X and Y to act, mainly, as home switches, plus one at the top of Z travel, is a reasonable minimum. If you set up your soft limits properly, that's probably OK for a machine that also has physical limits to movement. Soft limits will stop the machine running into the physical stops except in cases of major failure, but home switches are pretty much essential for ease of use. It's really valuable to be able to hit a button, home all axes, and work from a known machine position. Doesn't really matter if the home switches are at min or max travel, or a mix of both. Can configure Mach3/LinuxCNC to suit. However, limit switch at bottom of Z travel isn't of much use as there isn't really a definite "bottom Z travel" position. That's why you normally home Z to the top of travel.

  3. #3
    A limit switch on Z-- is not usual. So I presume you could install the other 5. If you are using Mach3 you have the facility of soft limits, I.E. once you have homed your machine mach 3 knows where it is and the dimensions of your work area are configured - but don't ask me how I have 5 limit switches so have never been there.

    Neale stepped in while I was checking something before posting - so overlap 80% on replies
    Last edited by cropwell; 10-01-2018 at 11:10 PM.
    Albert Einstein may have been a genius, but his brother Frank, was a monster

    Having just moved to Windows 10 (which is crap) My stress levels are through the roof !!!

  4. #4
    You can mount a limit switch in the centre of travel then use an adjustable striker at each end.

    Picture shows central limit switch and adjustable striker at each end.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	limits.jpg 
Views:	43 
Size:	117.3 KB 
ID:	23582  
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted

  5. #5
    Thank you for all your responses.


    Ill use three limti switches for homing and maybe a the extra 2 if i need them but ill try using soft limits and see how it goes.

Similar Threads

  1. What Limit Switches?
    By Chaz in forum General Electronics
    Replies: 26
    Last Post: 14-12-2016, 09:50 AM
  2. EMC2 home/limit switches... only acting as limit?
    By vputz in forum LinuxCNC/EMC
    Replies: 4
    Last Post: 15-10-2014, 08:51 AM
  3. Limit Switches
    By Leadhead in forum General Electronics
    Replies: 1
    Last Post: 16-10-2013, 09:41 AM
  4. Limit Switches with LED's
    By manofgresley in forum General Electronics
    Replies: 30
    Last Post: 02-01-2013, 02:08 PM
  5. Limit Switches
    By Lee Roberts in forum General Electronics
    Replies: 13
    Last Post: 27-06-2008, 01:21 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •