Hi

hope someone can explain this to me.

i have a part that is 6mm in height. My stock is 6.45. i use a facing tool path that removes .45 making the stock 6mm in height.

I have a pocket that is only meant to remove 2mm but when i run the simulation its removing 2.45mm

Ive tried selecting the top height from the top of the model in the tool path settings but it still removes 2.45mm.

can anyone help?

Click image for larger version.  Name: Capture3.PNG  Views: 380  Size: 100.8 KB  ID: 23625

Click image for larger version.  Name: Capture4.PNG  Views: 416  Size: 39.2 KB  ID: 23626