1. #1
    Hello everyone
    We are a joinery based workshop. We purchased a Biesse Rover 15 some years ago. It was working when bought second hand . Not used the machine for the last 18 months . It has now developed fault code and wonít even start.
    Requires a Biesse engineer to check it over and run me through the programmes.
    In the Oldham Area . Itís a paying job
    Regards
    Gally

  2. #2
    its going to be expensive if the control ram battery has died and lost all parameters. do you have full back up disks for it? control 480 or 481? best guy i can recommend is robin at summit machines- ex biesse engineer.

  3. #3
    Quote Originally Posted by battwell View Post
    its going to be expensive if the control ram battery has died and lost all parameters. do you have full back up disks for it? control 480 or 481? best guy i can recommend is robin at summit machines- ex biesse engineer.
    Only. One owner. Before me all books discs etc present
    Do you have a number I can contact robin on
    Regards
    Gallly

  4. #4
    when was a backup of the machine last made to disk? you will have lost all programs , tool info etc.
    robin will be best man to check with
    rob tudhope 07834 837715
    tell him brendon recommended

  5. #5
    ive converted my biesse machines to newer controls- but its a lot of work

  6. #6
    Thanks for that. Will ring him tomorrow when I am at the machine and let you know how I get on
    Regards
    Gally

Similar Threads

  1. Homag or Biesse?
    By Ross in forum Workshop & Equipment
    Replies: 2
    Last Post: 28-11-2015, 12:00 PM
  2. Biesse Rover 18 control panel vs floppy help!
    By jcb121 in forum Gantry/Router Machines & Building
    Replies: 1
    Last Post: 22-10-2015, 08:23 PM
  3. Homag Biesse
    By Ross in forum General Discussion
    Replies: 0
    Last Post: 04-03-2015, 12:47 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •