1. #1
    Hi, if you followed my thread you'd see I just finished my router. The screw has had maybe 2 hour's of use so far. I've ordered a 2010 for the machine as I'm going to upgrade the whole machine to 8*4 with R&P.
    In 2 months I'll be selling the 1m screws (1604) with fittings.

    So I have the ballscrew and fitting's, coupler and nema 23 (2 nm) for sale but not for 4 weeks (Whilst I wait for the new screw to arrive) I will use this one to get used to the machine do some minor cutting. Mostly I need to learn fusion cam and how that translates to the machine

    The Nema is not new but works fine, included because I'm going to upgrade the motor for this axis.

    This is the screw I bought

    After 110 +10 delivery for screw and motor in the UK, you're welcome to collect (Leicester).

    Screw is available the day the new screw comes quoted 3 weeks.
    Last edited by Desertboy; 23-01-2018 at 11:16 AM.
    http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm

    If you didn't buy it from China the company you bought it from did ;)

Similar Threads

  1. Lost circlips for 2005 and 1605 ballscrews
    By JoeHarris in forum Marketplace Discussion
    Replies: 8
    Last Post: 17-04-2013, 11:36 PM
  2. FOR SALE: RM1610 ballscrews(used + 1605 x 900mm screw (new)
    By rbs in forum Items For Sale
    Replies: 1
    Last Post: 10-05-2012, 08:23 PM
  3. Coupling
    By luke11cnc in forum Marketplace Discussion
    Replies: 10
    Last Post: 06-01-2012, 10:53 AM
  4. BK12 & BF12 bearings
    By mlmSolutions in forum Lead Screws, Nuts & Supports
    Replies: 0
    Last Post: 04-01-2011, 11:16 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts