1. #1
    I am looking for suggestions, after covering my workshop in fine lime wood dust. Despite having a vacuum cutter hood on the router. Do not really want to put a permanent hard enclosure over it, but thinking somewhere along the lines of a white nylon fabric tent enclosure, possibly with a plexiglass front window of some description.
    If you have been here, I would be grateful for any advice.
    Last edited by Leadhead; 26-01-2018 at 08:34 AM.

  2. #2
    Curtains are regularly used in industry for dust control and to ensure extraction has the best efficiency where used.
    You think that's too expensive? You're not a Model Engineer are you? :D

Similar Threads

  1. Reducing noise during run with box enclosure
    By Skydeals in forum Machine Discussion
    Replies: 4
    Last Post: 12-02-2015, 07:43 PM
  2. CNC 3020 Enclosure/Upgrade
    By Pointy in forum Electronic Project Building
    Replies: 59
    Last Post: 27-10-2014, 09:20 PM
  3. Help on building an enclosure
    By thomashomer1986 in forum General Electronics
    Replies: 12
    Last Post: 02-02-2014, 05:38 PM
  4. eBay: 400x600x200 enclosure 40quid
    By EddyCurrent in forum Items On eBay UK
    Replies: 4
    Last Post: 18-10-2013, 10:14 AM
  5. PCB enclosure ?
    By manofgresley in forum Electronic Project Building
    Replies: 15
    Last Post: 10-08-2012, 10:47 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •