Thread: FeatureCam - first attempt
I have been playing with FeatureCam 2009 for the last couple of days and I have eventually got my head round it, took a few hours but well worth it. I have attached my results below.
I have also attached a Featurecam post processor that I have been tweaking which will allow it to produce programs suitable for Mach3, be aware that it is not finished or fully tested but is producing good results as you can see.
If anyone does have a fully working and tested post processor then please let me know as I have looked everywhere and can't find one.
Last edited by HiltonSteve; 01-09-2009 at 08:04 PM.
By Robin Hewitt in forum DIY Plasma Build LogsReplies: 21Last Post: 02-09-2012, 07:05 PM
By deannos in forum Gantry/Router Machines & BuildingReplies: 89Last Post: 25-08-2012, 02:00 PM
BUILD LOG: My first attempt.... 8 x 4By trounce in forum DIY Router Build LogsReplies: 0Last Post: 18-10-2011, 10:31 AM
BUILD LOG: My First Attempt Of A CNCBy AdCNC in forum DIY Router Build LogsReplies: 61Last Post: 21-10-2010, 02:55 PM
By phill05 in forum Machine DiscussionReplies: 13Last Post: 01-06-2010, 04:42 PM