1. #1
    Not many posts here but here goes!

    I'm after the LCD panel for an X4 +

    I have taken the front panel off and the LCD panel has part number: YXD-19264H15B

    I don't see mto be getting anywhere with Syil direct, so thought I would try here.

    Any thoughts?


  2. #2
    m_c's Avatar
    Lives in East Lothian, United Kingdom. Last Activity: 5 Hours Ago Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,212. Received thanks 243 times, giving thanks to others 5 times.
    A quick search for that part number gives us this page with the key details - http://a1lcdtechnology.com/category/...me-lcd-module/
    Datasheet with a bit more specifics can be found at http://www.yexinda.com/pdf02/YXD-19264H15B%20LCM.pdf

    And a quick google for 192x64 lcd display, with a KS0108 compatible controller throws up this - https://www.buydisplay.com/default/3...ay-black-on-yg

    Unfortunately China is on holiday, so you're probably not going to get any response until next month...
    Avoiding the rubbish customer service from AluminiumWarehouse since July '13.

  3. #3
    Thanks M_C

    I had already seen the first 2 and have yet to receive a response from a1cdtechnology.
    The fact that China is on holiday maybe a factor (stated on the 'buydisplay' site as from 8/2/18 to 25/2/18)

    The 'buydisplay' link looks similar (only need to solder the pins for the cable) so this is probably worth a punt for for that price!

    Thanks again, Matt

  4. #4
    I have ordered one from BuyDisplay and will feedback once I have it!

  5. #5
    I ordered one of these:
    I needed to solder an edge pin connector to it (which was quite an easy job) and it works a treat.

  6. The Following User Says Thank You to Clockworld For This Useful Post:

Similar Threads

  1. SYIL Power Drawbar
    By petemilligan in forum Syil CNC Machines
    Replies: 3
    Last Post: 18-03-2017, 05:12 PM
  2. Syil X4 Plus - E-stop issue
    By Keith-h in forum Milling Machines, Builds & Conversions
    Replies: 8
    Last Post: 03-12-2016, 05:53 PM
  3. syil x4
    By geoff in forum Machine Discussion
    Replies: 8
    Last Post: 30-11-2016, 07:35 PM
  4. Syil x4 or x5 as CAD/CAM training 4 axis CNC machine ???
    By towdi.arek in forum Marketplace Discussion
    Replies: 3
    Last Post: 20-07-2013, 07:26 AM
  5. FOR SALE: Syil SX3 CNC Mill + Tools & Accessories
    By chas-SX3 in forum Items For Sale
    Replies: 1
    Last Post: 17-12-2011, 07:29 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts