1. #1
    Hi,
    Does anyone have experience with HSS86 and/or 2HSS86H drivers?
    http://www.jss-motor.com/product/nem...nd-driver.html
    http://www.jmc-motor.com/products.php?cid=225&id=157
    Is there a tuning software available for these drivers?
    How do they compare with Leadshine products in terms of quality?
    Thanks.

  2. #2

  3. #3
    I went with these about 3 years ago, although not of this seller. Never had a problem.

    TB6560 CNC 3A Router Single 1 Axis Controller Stepper Motor Driver Module

    Fiction is far more plausible when wrapped around a thread of truth

    Nothing great was ever achieved without enthusiasm.
    Ralph Waldo Emerson

Similar Threads

  1. JMC closed loop steppers - anyone have any experience?
    By Agathon in forum Stepper & Servo Motors
    Replies: 3
    Last Post: 14-09-2016, 05:51 PM
  2. Closed loop Step Servo Drive Driver 2HSS86H + 4.5N.M Motor + Encoder
    By george uk in forum Motor Drivers & Controllers
    Replies: 20
    Last Post: 23-06-2014, 08:38 PM
  3. Controller for 8NM closed loop leadshine drivers
    By Matt81 in forum Motor Drivers & Controllers
    Replies: 5
    Last Post: 19-06-2014, 09:08 AM
  4. Closed Loop Stepper Compared with Open Loop Stepper
    By Leadshine-Erci in forum Stepper & Servo Motors
    Replies: 0
    Last Post: 25-05-2012, 08:11 AM
  5. Closed Loop steppers
    By funkmonkey in forum Stepper & Servo Motors
    Replies: 24
    Last Post: 18-07-2009, 09:56 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •