1. #1
    After reading loads here, I'm looking for some solid advice on converting a Boxford A3 HSRi2 router to work on Mach 3.
    Would be looking at the MX4660 driver, and removing the old motherboard and driver. (see history below)
    I can't get a schematic, but think I need to test each cable to find out what it is, match it to the new driver, and set it up.
    Is it that simple?

    History:
    Machine currently works okay, but I don't like the Boxford software which is very basic, and needs hard resetting frequently. I For example, if accidently set on machine to manual mode, the CNC does not communicate with PC, so if you attempt to run a job, it gives an error message "machine not responding" and requires a hard reset.

  2. #2
    I've converted one of these to mach3 for a customer. Pretty much everything needs to be removed except for the Spindle board.
    Personally, I wouldn't use MX4660 as there are cheaper better options if you use individual components.
    I'd also suggest you go with an external motion controller rather than use the parallel port as it's much more reliable and when used with good Digital drives turns this machine into monster compared to using Boxford setup.

    The setup I used was this.
    Cslabs IP-M motion controller. This is high quality controller that provides 24Vdc I/O with spindle speed controller. It removes the need for breakout board which is source of trouble on many machines,

    Leadshine EM503 Digital drives
    44Vdc toroidal PSU

    Unfortunatly I didn't take any pictures of this conversion but it's very similair to this one done on Denford Router.

    Click image for larger version. 

Name:	IMAG0669.jpg 
Views:	72 
Size:	479.3 KB 
ID:	24041

  3. #3
    And what would you charge to do the change? Maybe it will work out cheaper for me considering the time it will take.

  4. #4
    Chaz's Avatar
    Lives in Ickenham, West London, United Kingdom. Last Activity: 4 Hours Ago Has been a member for 5-6 years. Has a total post count of 1,195. Received thanks 86 times, giving thanks to others 58 times.
    Quote Originally Posted by yankyg View Post
    And what would you charge to do the change? Maybe it will work out cheaper for me considering the time it will take.
    Where are you based?

  5. #5
    Quote Originally Posted by Chaz View Post
    Where are you based?
    The flag says Manchester
    ..Clive
    The more you know, The better you know, How little you know

  6. #6
    Yes, Manchester!

  7. #7
    Thanks everyone for all the messages and private PM's received. I have now made arrangements with JAZZCNC. Hopefully all arranged. I'm very grateful for all the help.

Similar Threads

  1. Advice Needed, Converting a Boxford VMC 190
    By Marv2097 in forum Boxford Vertical Mills
    Replies: 17
    Last Post: 19-12-2016, 04:53 PM
  2. Advice on converting my VMC
    By Proteus in forum Boxford Vertical Mills
    Replies: 57
    Last Post: 07-10-2016, 10:59 AM
  3. XHC WHB03 mpg pendant Mach3 Driver
    By Noplace in forum Artsoft Mach
    Replies: 4
    Last Post: 07-12-2015, 05:43 PM
  4. Converting a Stratasys 3D Printer to CNC router
    By liamo1991 in forum Gantry/Router Machines & Building
    Replies: 1
    Last Post: 14-11-2013, 08:23 PM
  5. Mach3 / Laptop No line driver !
    By bruce_miranda in forum Artsoft Mach
    Replies: 1
    Last Post: 11-09-2008, 04:42 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •