Thread: Painting pine

  1. #1
    Hi

    I'm having my first attempt at sign making. I've got some reclaimed pine I'm using.

    I want to paint the lettering but the paint tends to bleed across the wood and soaks in so sanding it is difficult.

    I'm using enamal paint so Before I buy any more paint I'm hoping someone can advise me.

    Thank you

    Sent from my SM-N910F using Tapatalk

  2. #2
    Washout's Avatar
    Lives in Bewdley, Worcs, United Kingdom. Last Activity: 21 Hours Ago Has been a member for 6-7 years. Has a total post count of 432. Received thanks 31 times, giving thanks to others 78 times. Made a monetary donation to the upkeep of the community.
    Hi dfox1987

    I would recommend sealing the wood first with a clear varnish, then apply your colour coat then sand back, if I'm understanding what you're trying to do.

    Hope that helps.


    Chris

  3. #3
    In the trade we use this: https://www.screwfix.com/p/dulux-tra...oat-1ltr/24583

    Can use it as a stain block for ceilings, walls etc, it's water based but clean or wrap your brush as soon as you've finished - it will go rock hard.
    .Me

  4. #4
    The best thing to do IMO is prime with the desired finish. Not another color primer or even transparent. Because the transparent will stay here and there and mess with the finish, you may not see if you have sanded it well or not. The Color primer will also go into the grain.

    So what i do is prime with the desired finish. I do it fast, but not mess the whole surface, i try to stay only where needed. This closes the surface. Then use 2 component polyurethane -one layer if interior and dark color. Otherwise 2 layers. Then sand all. Then carefully using a sponge, not brush, finish the top surface with the desired color. Here i use Top quality 1 component polyurethane for wood , exterior . This paint is more expensive than the 2k paint, hydro resistant, Uv resistant and is warranted for 8 years exterior.
    project 1 , 2, Dust Shoe ...

Similar Threads

  1. Replacing windows/painting
    By Ross-MTV in forum Machine Discussion
    Replies: 6
    Last Post: 15-11-2015, 01:27 PM
  2. Routing with 25mm pine
    By marsheppard in forum Woodwork Discussion
    Replies: 0
    Last Post: 12-05-2013, 06:46 PM
  3. FOR SALE: wood off cuts for signs ect , OAK , ASH , PINE different types
    By c cunningham in forum Items For Sale
    Replies: 2
    Last Post: 01-03-2011, 10:08 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •