Looking for quote on getting my case machined.

Odd looking thing yes but it is designed around housing electronics.

Here is a ZIP of the STEP and STL files as well as drawing sheets.
https://drive.google.com/open?id=1rQ...uR_9sKlkhwJG_o

Parts are no bigger than 110x50x15mm.

They will require machining on both sides as well as a rear hole cut out for sockets.
Don't require tapping but if you are able to do it on the machine then might as well tap the M3 and 1/4-20...

I need 25 of each.