-
08-05-2018 #11
The last post tells the truth about modern practice.The days of using a board and pencil or even using a computer as a 2D drawing system have faded away.A 3D model will help you avoid spatial clashes and can be viewed from any angle and with layers turned off or objects hidden for clarity you will have no trouble visualising the article.Best of all you can now find 3D CAD systems for little or no cost and why wouldn't you?Should you need a 2D drawing for any purpose a couple of mouse clicks will get you there.
-
09-05-2018 #12
I've always preferred third angle as that's what I was taught at university in the 60s.
Does anyone know what happened to second angle?
Russell
-
09-05-2018 #13
Last edited by magicniner; 09-05-2018 at 11:04 AM.
You think that's too expensive? You're not a Model Engineer are you? :D
-
12-05-2018 #14Gerry
______________________________________________
UCCNC 2022 Screenset
Mach3 2010 Screenset
JointCAM - CAM for Woodworking Joints
-
The Following 3 Users Say Thank You to Ger21 For This Useful Post:
-
12-05-2018 #15
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Digital angle gauge
By njhussey in forum Tool & Tooling TechnologyReplies: 4Last Post: 04-12-2012, 08:07 PM -
Rails and Angle - Going out of my mind
By Nealieboyee in forum Gantry/Router Machines & BuildingReplies: 6Last Post: 13-11-2012, 03:30 PM -
looking for 6061 T6 Aluminium angle
By Ccrewz in forum Gantry/Router Machines & BuildingReplies: 1Last Post: 09-04-2011, 09:10 PM -
WANTED: looking for 6061 T6 Aluminium angle
By Ccrewz in forum Items WantedReplies: 0Last Post: 31-03-2011, 07:54 AM -
RockCliff redesign in Al Angle
By templecorran in forum Gantry/Router Machines & BuildingReplies: 0Last Post: 27-07-2009, 12:57 PM
Bookmarks