3 Axis servo motor drive

[petesurrey]

probably looking at 800 for the 3 axis setup.

I also have a HSD spindle with ISO 30 ATC

[Chaz]

probably looking at 800 for the 3 axis setup.

I also have a HSD spindle with ISO 30 ATC

What model HSD? Cost?

[johnsattuk]

I also have a HSD spindle with ISO 30 ATC

Can you give model no etc. Pics?

[petesurrey]

Ok guys its an ES919 ISO 30 spindle 24k rpm. I do have VFD that runs it from single phase. This spindle new in 5-6k and they are really worth it i can happily take 10mm DOC in marine ply with 25mm dia cutter at 3m/min. I do also have 15 tool holders er32 as well as the tool change forks that catch the tool.

video here:
https://www.youtube.com/watch?v=nwpfh3fwHfw
https://www.youtube.com/watch?v=fc9yb6pCzYA

[Chaz]

Ok guys its an ES919 ISO 30 spindle 24k rpm. I do have VFD that runs it from single phase. This spindle new in 5-6k and they are really worth it i can happily take 10mm DOC in marine ply with 25mm dia cutter at 3m/min. I do also have 15 tool holders er32 as well as the tool change forks that catch the tool.

video here:
https://www.youtube.com/watch?v=nwpfh3fwHfw
https://www.youtube.com/watch?v=fc9yb6pCzYA

Cost?

[Chaz]

This is mildly frustrating. I know everyone is busy but you post stuff for sale, people express an interest, but no response ....

[petesurrey]

This is mildly frustrating. I know everyone is busy but you post stuff for sale, people express an interest, but no response ....

i am sorry i have been in paris with work.

If you are interested make me an offer.

[johnsattuk]

Can you give a bit more info on the spindle as there are several variations of the 919.

KW ??
Voltage ??
2 pole, 4 pole ??

Pic of the rating plate would help.