3 Axis servo motor drive

[petesurrey]

Hi am looking to sell my CNC router parts.
I have 3 servo drives with matched motors 1.5kw with 110mm frame size http://www.xinje.com/en/ProductView....223&SortID=177

They have been running my router for 1 year now and work really well. I have another machine running the same drives but with 130 frame motors and ive had that fro 3 years never had any problems.

I bought this set face to face in China and they are really good quality. I am open to offer for the full set of three. I do have another as well so in total 4 sets but the 4th set is brand new.

The drives can accept a wide range of inputs including step directions as well ad differential. They can also accept analogue drive as well.

These would be perfect for a Bridgeport mill conversion and be really accurate as they have 2500ppr encoders so closed loop.

Let me know if you are interested.

[audioandy]

What kind of price you looking for Pete?

[Chaz]

I may also be interested in some, price pending.

[petesurrey]

probably looking at 800 for the 3 axis setup.

I also have a HSD spindle with ISO 30 ATC

[Chaz]

probably looking at 800 for the 3 axis setup.

I also have a HSD spindle with ISO 30 ATC

What model HSD? Cost?

[johnsattuk]

I also have a HSD spindle with ISO 30 ATC

Can you give model no etc. Pics?

[petesurrey]

Ok guys its an ES919 ISO 30 spindle 24k rpm. I do have VFD that runs it from single phase. This spindle new in 5-6k and they are really worth it i can happily take 10mm DOC in marine ply with 25mm dia cutter at 3m/min. I do also have 15 tool holders er32 as well as the tool change forks that catch the tool.

video here:
https://www.youtube.com/watch?v=nwpfh3fwHfw
https://www.youtube.com/watch?v=fc9yb6pCzYA

[Chaz]

Ok guys its an ES919 ISO 30 spindle 24k rpm. I do have VFD that runs it from single phase. This spindle new in 5-6k and they are really worth it i can happily take 10mm DOC in marine ply with 25mm dia cutter at 3m/min. I do also have 15 tool holders er32 as well as the tool change forks that catch the tool.

video here:
https://www.youtube.com/watch?v=nwpfh3fwHfw
https://www.youtube.com/watch?v=fc9yb6pCzYA

Cost?

[Chaz]

This is mildly frustrating. I know everyone is busy but you post stuff for sale, people express an interest, but no response ....

[petesurrey]

This is mildly frustrating. I know everyone is busy but you post stuff for sale, people express an interest, but no response ....

i am sorry i have been in paris with work.

If you are interested make me an offer.