1. #1
    So I purchased a routout 8 x 4 CNC as an obligatory last min late night ebay purchase...

    I was so excited to start cutting random shapes and designing new things, so I built it up (most of it being built already and boom....

    Haven't got a damm idea how to use the thing!

    I have connected most the cables.. seemed to be missing a power supply so I bought one and still... haven't got a clue!

    99% built I have switch it on and nothing other than the box sometimes makes a noise..


    I haven't got a clue on how to use the software.

    Get get it up and running

    how to make a routable image


    So if anyone's in the Sunderland area that's able to help finish it off and show me the ropes


    If you could contact me with a rough price to get it up and running thanks

  2. #2
    Last edited by AndyGuid; 15-06-2018 at 10:18 AM.

Similar Threads

  1. NEW MEMBER: Sunderland area CNC guru or engineer needed routout CNC
    By BENN MOON in forum New Member Introductions
    Replies: 0
    Last Post: 14-06-2018, 02:36 PM
  2. CNC mobile / on-site servicing & repair engineer needed
    By Jimmer303 in forum Opportunities Available & Sought
    Replies: 0
    Last Post: 20-05-2018, 07:26 PM
  3. NEW MEMBER: Young engineer turning into machinist from Surrey (Redhill/Reigate area)
    By JaviPK7 in forum New Member Introductions
    Replies: 1
    Last Post: 04-03-2017, 07:26 PM
  4. BUILD LOG: Need expert guidance on rookie DIY build.
    By Steeki in forum DIY Mill Build Logs
    Replies: 19
    Last Post: 15-10-2015, 09:10 AM
  5. RFQ: freelance electronics engineer needed?
    By deisel in forum Projects, Jobs & Requests
    Replies: 0
    Last Post: 09-10-2013, 02:21 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •