1. #1
    anybody got a denford denstep card that is surplus to requirements? mine died in the middle of a job on my novamill recently. cards from other machines should also be compatible. eg. micromill, microrouter etc

    Click image for larger version. 

Name:	20180614_221512 copy.jpg 
Views:	43 
Size:	496.4 KB 
ID:	24414

  2. #2
    Chaz's Avatar
    Lives in Ickenham, West London, United Kingdom. Last Activity: 21 Hours Ago Has been a member for 5-6 years. Has a total post count of 1,262. Received thanks 92 times, giving thanks to others 60 times.
    Ill check, I might have similar.

  3. I'll check, but I think I threw the rack from my Triac out a few months ago, as I got fed up tripping over it.
    Avoiding the rubbish customer service from AluminiumWarehouse since July '13.

  4. #4
    Thanks guys, would be good to get this job finished. Then think about a new motion controller.... Ah decisions

  5. Just checked, and the rack is still there, and it's a red 7-segment display, however as it's a rack mount card, the main connector is a 90deg connector, and if my frazzled brain is working enough, if it did plug in, the rows of pins would be mirrored from what you need.

    You could change the connector, but I personally don't fancy unsoldering a connector with that many pins.
    You can have it for the cost of postage if want, but I have no idea if it functions. It did power up and the LED did flash how it should, but that's as far as I went with it.
    The firmware is a different version, however you can just swap the chips, that's provided yours isn't the problem.

    Click image for larger version. 

Name:	IMAG0457.jpg 
Views:	32 
Size:	665.0 KB 
ID:	24422
    Avoiding the rubbish customer service from AluminiumWarehouse since July '13.

  6. #6
    Chaz's Avatar
    Lives in Ickenham, West London, United Kingdom. Last Activity: 21 Hours Ago Has been a member for 5-6 years. Has a total post count of 1,262. Received thanks 92 times, giving thanks to others 60 times.
    Let me know if that doesnt work and Ill go dig out my stuff.

  7. #7
    Pm sent

Similar Threads

  1. WANTED: Denford Triac Euro Card, 2.1 Eprom or USB Rack card
    By Sooty in forum Items Wanted
    Replies: 35
    Last Post: 05-09-2017, 10:28 AM
  2. FOR SALE: Denford Triac PC inc Denford table plus chucks, and Denford CD software etc
    By Piero franchi in forum Items For Sale
    Replies: 8
    Last Post: 14-02-2017, 04:47 PM
  3. Denford TRIAC motion control card
    By Tommy in forum Denford Mills
    Replies: 0
    Last Post: 12-01-2017, 09:55 AM
  4. Denford TRIAC motion control card
    By Tommy in forum Tool & Tooling Technology
    Replies: 0
    Last Post: 12-01-2017, 09:44 AM
  5. Replies: 0
    Last Post: 08-07-2014, 03:11 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •