Page 3 of 3 FirstFirst 123
  1. #21
    I had the spindle mount lower down in my original pics. Iíll put it back where it was. Thanks


    Sent from my iPhone using Tapatalk

  2. #22
    I have now moved the spindle mount lower onto the backing plate, how does this look?:

    Click image for larger version. 

Name:	EVO MKVI v182.jpg 
Views:	43 
Size:	105.9 KB 
ID:	24477Click image for larger version. 

Name:	EVO MKVI v18.jpg 
Views:	45 
Size:	98.3 KB 
ID:	24478

    I have done a bit more digging into why people within the Joe's community have moved away from ball screws to R&P, the reasoning appears to be about speed, ease of assembly / maintenace and price more than anything. Looking at the pricing of C7 leadscrews on BST Automation they seem to be cheaper than using the CNC routerparts rack and pinion system (although the postage costs are about as much as the screws!) - I'm confused as to which way to go, any suggestions please? Would I be looking at 2010 for the longest axis, it will be 1600mm long? This comes out around 1000RPM critical speed - is this too low?

    All help gratefully received.

    Cheers

  3. #23
    Are you confusing lead screws and ball screws?
    Joe's used to use lead screws and went to R&P ,ball screws are better than both but way more expensive!

  4. #24
    Looks ok to me with that spindle mount position. One thing I did on my Mk3 was to drill and tap a second set of holes a bit higher on the Y plate so I had the option of mounting it higher for very tall work. Of course you can only reach across that work an amount until the Y plate may hit it but it is a quick feature to add at the build stage. I also added tapped holes along one edge of the Y plate to allow me to bolt a reference strip and maintain spindle tram alignment whilst adjusting the spindle holder. Never used it of course! But worth a mention

    Canít help on the ballscrew a that long and r&p as havenít used them.

    If you search the forum that sort of thing has been asked before and Jazzcnc has given advice
    Building a CNC machine to make a better one since 2010 . . .
    MK1 (1st photo), MK2, MK3, MK4

  5. #25
    As far as I can tell Joe's Hybrid machine used lead screws, the Evo used ball screws and the EVO MKII uses R&P, just wondering why they would move away from ball screws if they are the best?

    Good shout putting extra holes for spindle mounting, I'll definitely do that.

Page 3 of 3 FirstFirst 123

Similar Threads

  1. BUILD LOG: Router Build Mk 1
    By hoppo in forum DIY Router Build Logs
    Replies: 19
    Last Post: 14-08-2017, 08:31 AM
  2. Router build
    By Blackrat in forum Gantry/Router Machines & Building
    Replies: 39
    Last Post: 18-12-2014, 07:19 PM
  3. RFQ: Does anyone want to build me a cnc router?
    By totally useless in forum Projects, Jobs & Requests
    Replies: 31
    Last Post: 08-05-2014, 09:55 PM
  4. BUILD LOG: My Router Build!
    By andy0202 in forum DIY Router Build Logs
    Replies: 3
    Last Post: 31-01-2013, 08:51 AM
  5. BUILD LOG: A3 Router Build
    By GTJim in forum DIY Router Build Logs
    Replies: 6
    Last Post: 17-02-2012, 12:53 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •