1. #1
    I have cnc router have 3axis when I see control unit I see it have 5drivers instead of 3
    3 of them have same thickness and 2 have another thickness
    what is the role of small drivers !?

    Sent from my ASUS_Z00A using Tapatalk

  2. #2
    Chaz's Avatar
    Lives in Ickenham, West London, United Kingdom. Last Activity: 13 Hours Ago Has been a member for 5-6 years. Has a total post count of 1,213. Received thanks 90 times, giving thanks to others 59 times.
    Follow the motor cables to the motor, that will tell you.

    5 drivers could be for dual motors for Y (or X)? Is there a 4th axis? Is the spindle controlled by a drive?

  3. #3
    Quote Originally Posted by Chaz View Post
    Follow the motor cables to the motor, that will tell you.

    5 drivers could be for dual motors for Y (or X)? Is there a 4th axis? Is the spindle controlled by a drive?
    no spindle have dedicated VFD
    so If I have dual Y
    Can I connect on the same output from interface board!!?
    RichAuto Dsp A15

    Sent from my ASUS_Z00A using Tapatalk

  4. #4
    Chaz's Avatar
    Lives in Ickenham, West London, United Kingdom. Last Activity: 13 Hours Ago Has been a member for 5-6 years. Has a total post count of 1,213. Received thanks 90 times, giving thanks to others 59 times.
    Quote Originally Posted by alaamomen9 View Post
    no spindle have dedicated VFD
    so If I have dual Y
    Can I connect on the same output from interface board!!?
    RichAuto Dsp A15

    Sent from my ASUS_Z00A using Tapatalk
    I dont know, not done any slave connectivity before. Im sure JazzCNC or others will offer some guidance.

  5. The Following User Says Thank You to Chaz For This Useful Post:


  6. #5
    so If I have dual Y
    Can I connect on the same output from interface board!!?
    What do you mean by "If I have dual Y " you either have or have not!!

    You have not answered Chaz re "follow the motor wires from the drives"

    Pic off the machine might help. more info required
    ..Clive
    The more you know, The better you know, How little you know

  7. #6
    Quote Originally Posted by Clive S View Post
    What do you mean by "If I have dual Y " you either have or have not!!

    You have not answered Chaz re "follow the motor wires from the drives"

    Pic off the machine might help. more info required
    manufacturer has used dsp0501
    when I see manual of dsp It was support step motor only !!
    so what is corrert manfacturer or manual !!?

    Sent from my ASUS_Z00A using Tapatalk

Similar Threads

  1. WANTED: Omron R88M-U200 or Yaskawa SGM/SGMP-02A Servos
    By Agathon in forum Items Wanted
    Replies: 0
    Last Post: 20-07-2017, 01:24 PM
  2. Replies: 0
    Last Post: 18-07-2017, 01:53 PM
  3. WANTED: Yaskawa servopack
    By johnsattuk in forum Items Wanted
    Replies: 0
    Last Post: 20-01-2016, 12:03 AM
  4. Problem with Yaskawa servodrives
    By btxsistemas in forum Stepper & Servo Motors
    Replies: 5
    Last Post: 16-06-2012, 11:44 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •