1. #1
    hey people. my fruiend and i have just purchashed a cnc 3040. we have windows xp running mach 3. which has downloaded and appears to be working. however it seems as if the cnc controller is not .the cnc controller stop light is permamnently on. please help any advice wholely appreciated

  2. #2
    Doddy's Avatar
    Lives in Preston, United Kingdom. Last Activity: 3 Hours Ago Has been a member for 4-5 years. Has a total post count of 293. Received thanks 33 times, giving thanks to others 10 times.
    Not a lot of information to go on. Post a photo or two to set the context, if possible.

    If you're new to this... really daft question... is the e-stop pressed in? (the e-stop tend to be locking "mushroom" buttons on the control box or the router itself) - being a locking button, they require you to rotate the knob to release the e-stop, and allow the machine to recover.

    In Mach3, you get the RESET button flashing on start-up. This is normal and you are expected to click on the button on-screen to get into a running mode. If the RESET button remains flashing then look at the bottom of the screen for hints as to why this is (such as Emergency Stop active)

    Other than that - I've not seen any image of a CNCEST that has a "stop" lamp.

    Another couple of questions - Mach3 needs to be configured to the machine being controlled - binding the interface to the machines X/Y/Z/A etc axis, and tuning the number of pulses required to move each axis a set distance - were you supplied a suitable configuration file for this? (if not, budget a couple of hours to get this working). What is the behaviour of "Reset" within Mach3?

    You mention XP - is the machine connected through the parallel port on the computer?, the link below

    https://www.cnczone.com/forums/chine...-software.html suggests a special driver for the USB versions of the CNCEST machines - I don't know if this same driver is appropriate for your machine.

Similar Threads

  1. BUILD LOG: Ar last!!! Started my Gantry 3-Axis CNC Build
    By MikeyC38 in forum DIY Router Build Logs
    Replies: 74
    Last Post: 4 Weeks Ago, 10:29 PM
  2. Getting started and already confused
    By Palletlad in forum General Computing
    Replies: 10
    Last Post: 12-01-2018, 10:00 PM
  3. NEW MEMBER: New to CAD, looking for help in getting started cutting CF sheet
    By Devil_WAH in forum New Member Introductions
    Replies: 2
    Last Post: 23-02-2017, 06:30 PM
  4. Getting started BobCAD V27
    By peter gillespie in forum BobCAD-CAM
    Replies: 0
    Last Post: 11-06-2015, 11:00 AM
  5. NEW MEMBER: Started building!
    By bobgrant in forum New Member Introductions
    Replies: 1
    Last Post: 02-09-2010, 08:42 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •