. .
  1. #1
    I have just wired up my spindle. The spindle is running very hot and I get a error after a few minutes on the enerror is E0H5 and E0HA. Now the settings have pd008 at 220 and the spindle label says 080#200 2.2kw 110V. 8.5A 400hz. Itís water cooled. The inverter is a Huanyang hy02d211b. 3phac110+-20% 50hz+-5hz in. 3 ph 0-110ac 2.2kw 20A .50-400hz out.

    This is running in the US 110V 60hz. So should pd008 be set at 110. Plus pd173 is at 255.

    Is there a problem that the inverter is for 50+-5 hz running on US current.

  2. #2
    Ger21's Avatar
    Lives in Detroit, United States. Last Activity: 2 Weeks Ago Has been a member for 7-8 years. Has a total post count of 643. Received thanks 90 times, giving thanks to others 0 times. Referred 1 members to the community.
    PD008 should be set to 110.
    There's a good chance you've already damaged either the spindle or VFD, or both.
    Gerry
    ______________________________________________
    UCCNC 2017 Screenset

    Mach3 2010 Screenset

    JointCAM - CAM for Woodworking Joints

  3. #3
    Changed settings and everything is working fine.

  4. #4
    jms's Avatar
    Lives in orange county, United States. Last Activity: 11-12-2019 Has been a member for 0-1 years. Has a total post count of 1.
    Hi, I also need the settings for a 110v HY vfd with 2.2 kw, 110v spindle, 8.5 amp. I think I have most correct but I am unsure about PD006, PD007, PD009 , PD010 and PD041.

    Thanks, Joe

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. THC Setting Issue?
    By Davek0974 in forum Plasma Table Machines
    Replies: 8
    Last Post: 17-10-2014, 07:53 AM
  2. Setting my table up...
    By Davek0974 in forum Plasma Table Machines
    Replies: 23
    Last Post: 10-03-2014, 08:24 PM
  3. setting up a business
    By dstivens in forum Opportunities Available & Sought
    Replies: 5
    Last Post: 16-05-2013, 10:28 PM
  4. setting the origin
    By Fivetide in forum Computer Software
    Replies: 9
    Last Post: 04-02-2013, 12:18 AM
  5. setting up Moeller VFD to chinese spindle
    By routercnc in forum Spindles & Drive Motors
    Replies: 16
    Last Post: 16-02-2011, 08:22 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •