Mach3 and USB to cnc driver

[Silver]

You can't do away with the conversion process. You will always need a motion controller, a BOB and drivers. The blue card is your BOB and drivers combined to one.

I am aware that we can't do away with the conversion process but that can be done on a board directly rather than having the UC100 plugged in can't it?

What o am saying is that even with the UC100 I will still have the same control system. It's only a thee axis and that alone hampers development.

I was planning to upgrade it eventually to 4 axis but with the issues of the converter it's possibly brought that forward as I still see that the UC100 is a "fix" and an adaptor rather than buying a replacement controller that doesn't need need the UC100.

But of course, buying a UC400 would be even better because that way you can do away with the USB.

Are you a CNC drive Sales man or ambassador at all? Seem to be pushing their products.!!