Thread: CNC Webcam for work positioning
-
20-08-2018 #1
Could anyone recommend a good but affordable webcam for work positioning. I am currently using two. An ultra cheap little square unit and an endoscope type. They both perform OK but the square one is difficult to mount accurately and the tubular endoscope mounts easily but has no focus and is fixed obviously for close inspection. So seeking something in between. i.e. an illuminated tubular body with focus and depth of field. If you have found and used one that does not break the bank. I would be most obliged for your recommendation.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
4th Axis Work Holding For Rectangular Work
By magicniner in forum Workshop & EquipmentReplies: 1Last Post: 20-10-2019, 03:02 AM -
Denford Cyclone -turret positioning error
By Dangle_kt in forum Denford LathesReplies: 8Last Post: 01-03-2018, 01:37 PM -
Couple of questions about carriage positioning on X axis and z axis rails
By Richard in forum Gantry/Router Machines & BuildingReplies: 2Last Post: 19-11-2017, 10:16 AM -
Basics on control and positioning with stepper motors
By richard2112 in forum Stepper & Servo MotorsReplies: 4Last Post: 30-06-2014, 08:39 AM -
WANTED: Frame work
By D-man in forum Items WantedReplies: 3Last Post: 30-12-2011, 09:03 PM
Bookmarks