. .
  1. Hello everyone,

    I am using estlcam to create gcode, I have a basic engraving tool path, Is there a quick way to engrave in 3 stages, for example engrave the toolpath at .1mm deep, then do another pass but this time at .2mm deep and a final one at .3mm deep?

    Any help would be great

    cheers
    Enthusiastic with CNC stuff but a proper novice so be gentle
    My build blog:
    Chinese 3020t Build

  2. #2
    If your software doesn't support that it's easy to generate the code for 3 separate jobs at the required depths and then cut & paste the middle out of the second 2 into the first to make one job.
    Line numbers in the code are for you and not your controller, you can have multiple blocks of code with the same line numbers in one programme and most controllers don't care.
    You think that's too expensive? You're not a Model Engineer are you? :D

  3. #3
    I use Estlcam, I would just set my depth of cut to .1 mm in the tools list and depth of engraving at .3 mm

  4. #4
    Beat me to that John. That`s just how I do it

  5. thats makes perfect sense, I just didnt know how to set that, for example when I was importing a dxf into planet cnc software, you could state a cutting deptch and then the depth each pass will make, so a cutting depth of 4mm but with 1mm passes if that makes sense.

    Think I need to try and work out how to set tool information up
    Enthusiastic with CNC stuff but a proper novice so be gentle
    My build blog:
    Chinese 3020t Build

  6. #6
    Here is Christians video of tool setup :-
    https://www.youtube.com/watch?v=l48C...fnfQUA&index=2

  7. Leadhead thank you very much mate will have a look at lunch with a brew :-)
    Enthusiastic with CNC stuff but a proper novice so be gentle
    My build blog:
    Chinese 3020t Build

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Milling: creating a smooth end finish in a slot
    By Rob Meades in forum Tool & Tooling Technology
    Replies: 34
    Last Post: 25-12-2016, 04:15 PM
  2. 2.5D CAM Software "Estlcam 2.5D"
    By Christian Knuell in forum Manufacturer News
    Replies: 4
    Last Post: 21-04-2016, 08:36 PM
  3. Creating .TAP files in Mach3
    By Ahmed in forum Artsoft Mach (3 & 4)
    Replies: 3
    Last Post: 23-11-2013, 08:51 AM
  4. Cambium Code Web Tools Parametric G-code Generation
    By CambiumMachines in forum Manufacturer News
    Replies: 0
    Last Post: 09-01-2013, 03:56 AM
  5. Creating Local group/club???
    By m.marino in forum General Discussion
    Replies: 0
    Last Post: 02-07-2010, 10:03 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •