CRP2448 2' x 4' CNC Router Built from kit imported from USA April 2018
Water cooled 80mm 2.2kw Spindle 0-240000 rpm
NEMA 23 version: Rapids up to 600 IPM+, cutting feedrates 200 IPM+
Rack and Pinion version
Huanyang VFD
80w Water pump and tubing
Ethernet Smoothstepper
Pepperl + Fuchs Proximity Sensor Kit
Tramming GMT 2.2kw Spindle Mount and 80mm spindle mount
Mach 3 Remote control
Complete cable track kit
Auto Z and corner finding touch plate
rugged aluminium profile leg kit
Onsrud cutter selection new x 11
Onsrud cutter selection used x 13
Trend cutters 6 used
A selction of 43 other cutters nearly all new, wood and metal ones inc facing cutter
Diamond drag and tangential knife, but no blade
Full set of ER20 collets 1mm to 13mm
Spare spindle collet nuts x 3
80mm hose and hose brush assembly
Sony Elitebook laptop 2.6ghz 8gb ram 500gb drive Win 10 pro and extra 24" monitor.


A nearly new CNC setup that is very quiet and fast, i have to sell it due to a developing health risk and having already make a couple of mistakes i need to sell it before i injure myself or somebody else or even damage the machine.
I have used Fusion 360 and vectric pro with Mach 3 with great success (not supplied).
I cant imagine it has done more than 50 hours work since commission in May
Any demo welcome, i have some pictures or video which i will put on you tube or email.
It will need to be reduced down to remove it from my garage, i cannot help too much due to heart condition, although might be able to get a friend to help with delivery at a cost, all dependant on location and timeframes. Current location Haltwhistle Northumberland.

3500

https://youtu.be/rQyRf2nFOF8
https://youtu.be/3sM2EwmTyR0