JPG toSTL

[cropwell]

Try this https://www.dropbox.com/s/7no94ldimo...20mk3.stl?dl=0

[johnsattuk]

That one seems to have done the trick, machining time ~5hrs instead of 20, will cut one asap

Thanks for your patience and persiverance

[johnsattuk]

Have cut a half size one, for machining time reasons, and it looks very good. Full size one will be better for the smaller detail, I used a 1.5mm ball nose which was a bit big for the fine detail.

[cropwell]

I tried out a 3D print

Looks better as metal

[johnsattuk]

Many thanks to Rob, has printed a logo for me, has much better detail than I could have carved

[johnsattuk]

Used plenty of laquer to glue the print to the wood, gives it lot of sparkle in the sunlight

[cropwell]

Glad to help. I expected it to be sprayed gold, but shiny wet-look black is more in keeping with the original.