Page 2 of 2 FirstFirst 12
  1. Enthusiastic with CNC stuff but a proper novice so be gentle
    My build blog:
    Chinese 3020t Build

  2. #12
    That link doesn't work for me Ravi?

  3. Quote Originally Posted by AndyGuid View Post
    That link doesn't work for me Ravi?
    https://www.youtube.com/edit?ar=1&o=...id=PwqoYwrSU40
    Enthusiastic with CNC stuff but a proper novice so be gentle
    My build blog:
    Chinese 3020t Build

  4. just realised that link is the same lol, will double check its a public vid :-)
    Enthusiastic with CNC stuff but a proper novice so be gentle
    My build blog:
    Chinese 3020t Build

  5. Enthusiastic with CNC stuff but a proper novice so be gentle
    My build blog:
    Chinese 3020t Build

  6. #16
    Hi Ravi
    Sorry for not replying sooner but have been busy machining parts for my gas turbine.
    I see you have carried out some serious mods to your machine and I am pleased you have got it working.
    I have downloaded Mach 3 and connected it with a parellel port, the only problem I have now is the emergency stop wonít let me do any machining as it comes up with emergency mode active when I connect to the CNC controller.
    The only reason for using Mach 3 is I have an old boxford TCL 125 lathe and a
    Wizzard 2000 st engraving machine to hopefully get working and I would use the Mach software for all three machines.

    If I donít get any luck with the software Iíll ask the question on the forum.

    Many thanks Len.

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Replies: 0
    Last Post: 27-09-2017, 12:32 PM
  2. NEW MEMBER: Need Help with my new CNC 3040 Machine.
    By SMG11 in forum New Member Introductions
    Replies: 0
    Last Post: 27-09-2017, 12:14 AM
  3. NEW MEMBER: Newbie with 3040 machine
    By Rwoolley in forum New Member Introductions
    Replies: 8
    Last Post: 21-05-2017, 10:37 PM
  4. 3040 machine - Which axis has the flexible couplings?
    By DaveMorris in forum Chinese Machines
    Replies: 7
    Last Post: 30-09-2015, 08:42 AM
  5. cnc 3040 and mach3 problems
    By hoggy in forum Machine Discussion
    Replies: 18
    Last Post: 11-10-2014, 10:58 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •