1. #1
    Well it looks like I'm going to have to bite the bullet and make myself a router, if only because I can't find any ready made ones that will fit through the tiny door to my workshop - it'll be fun as well of course, and I'll understand and be able to maintain it . I've started by going through all the sums on rigidity & weight using @routercnc's calculator and some civil engineering tools, it's amazing how much more interesting moments and such stuff are when you're applying them to a real project rather than in a boring physics lesson. Now one interesting thing that's come out of this is that a square gantry extrusion (say 120 x 120) has a greater torsional rigidity than a rectangular of roughly equal weight/cost (160 x 80). Torsional rigidity seems to be the dominant source of tool error if you have a decent Z travel, so I'm wondering whether there's other reasons why normally such beams tend to be rectangular??? One thing that springs to mind is the reduced distance between the X axis* rails, anyone know how important this would be please?

    *I'm taking X axis to be the travel along the gantry looking at the front of the machine.
    Last edited by Voicecoil; 29-09-2018 at 01:17 PM.

Similar Threads

  1. Cutting a curved shape from a block of aluminum
    By eljainc in forum Programmers Corner
    Replies: 21
    Last Post: 21-11-2015, 12:06 PM
  2. BUILD LOG: 8x4 router build. Steel base & Aluminium gantry gantry
    By D-man in forum DIY Router Build Logs
    Replies: 54
    Last Post: 29-11-2014, 08:48 PM
  3. symmetrical hart shape in vectric v carve pro
    By cockneyrebel in forum Vectric
    Replies: 15
    Last Post: 24-02-2014, 02:55 PM
  4. Flexible Stainless Steel pipe that holds its shape?
    By Fivetide in forum Marketplace Discussion
    Replies: 15
    Last Post: 14-02-2013, 07:35 PM
  5. WANTED: Ali Extrusion anyone?
    By D-man in forum Items Wanted
    Replies: 0
    Last Post: 08-11-2010, 11:01 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •