Page 2 of 2 FirstFirst 12
  1. #11
    Neale's Avatar
    Lives in Plymouth, United Kingdom. Last Activity: 2 Hours Ago Has been a member for 5-6 years. Has a total post count of 1,168. Received thanks 212 times, giving thanks to others 5 times.
    The gcode is telling it to run really slowly. That's about a sixtieth of the speed in the previous line. It appears to be happening when there is a much larger movement in A than in previous lines. Suggests something happening at the CAM toolpath generation stage, which I why I wondered about the feed settings. At this point, it doesn't look like a Mach3 or machine issue.

  2. #12
    amxen's Avatar
    Lives in Bradford, United Kingdom. Last Activity: 4 Weeks Ago Has been a member for 4-5 years. Has a total post count of 79. Received thanks 1 times, giving thanks to others 5 times.
    i think you're on the right track I changed the gcode line where it slows down f346 to F646 and i moves faster. I just need to work out why now. But I'm a lot happier than I was this time this morning. Slowly getting to the bottom of it

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Y axis problem
    By Kev2960 in forum Chinese Machines
    Replies: 32
    Last Post: 15-09-2017, 03:38 PM
  2. Z axis problem
    By Kev2960 in forum Chinese Machines
    Replies: 12
    Last Post: 19-02-2017, 09:09 PM
  3. Help with Problem X axis Stepper Please
    By howser37 in forum Gantry/Router Machines & Building
    Replies: 53
    Last Post: 09-02-2017, 05:31 PM
  4. Problem with my Z axis
    By mikem in forum Stepper & Servo Motors
    Replies: 4
    Last Post: 03-11-2015, 10:52 PM
  5. z axis problem
    By rickybabe in forum Linear & Rotary Motion
    Replies: 3
    Last Post: 28-04-2010, 08:04 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •