1. #1
    Wanted Adjustable Tailstock with nominal 100mm centre height. Can be scruffy even a project if you have some bits.
    Last edited by Leadhead; 24-09-2018 at 03:06 PM.

  2. #2
    Hi Leadhead
    A bit more detail might get a better responce, is it for a 4th axis or a lathe ?

  3. #3
    Just for rotary table accessory. Nothing fancy required. I made a mistake the nominal centre height is 100mm.

Similar Threads

  1. Adjustable Boring Bar
    By jamesgates1000 in forum Tool & Tooling Technology
    Replies: 1
    Last Post: 18-05-2016, 06:57 PM
  2. WANTED: Looking for tailstock backplate
    By cropwell in forum Items Wanted
    Replies: 2
    Last Post: 30-05-2015, 01:19 PM
  3. Clarke CL300 with dodgy Tailstock
    By booski in forum Clarke Lathes
    Replies: 15
    Last Post: 02-12-2013, 04:26 PM
  4. Adjustable spindle mount?
    By cncJim in forum Marketplace Discussion
    Replies: 2
    Last Post: 19-06-2013, 07:58 PM
  5. WANTED: adjustable tailstock
    By johngoodrich in forum Items Wanted
    Replies: 0
    Last Post: 29-03-2012, 06:38 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts