1. #1
    Whilst out tramping the mountains the other afternoon and pondering the best way to do a z-axis, I had a weird idea . Instead of the usual way of having a high gantry and dangling the spindle down from this on the z-axis mechanism, why not mount the spindle straight to the X carriage (I'm viewing the machine normal to the gantry when talking of X and Y) and move the whole gantry up and down? Yes, it will require more bits but perhaps could yield more rigidity at the lower extremes of Z (tool close to the bed - which is probably where it'll be used most of the time). Any "racking" problems should be avoidable using closed-loop Z motors I think.
    Does anyone know of any machines that use this approach?

  2. #2
    There is a blue machine in Youtube like that made by a German builder (?)
    Jazzcnc noticed it and posted comments on it in this forum. Yes it could be made to work. Would be worth sketching it out to see where the challenges were in construction from a practical point of view.
    Building a CNC machine to make a better one since 2010 . . .
    MK1 (1st photo), MK2, MK3, MK4

  3. #3
    Greeny's Avatar
    Lives in North Yorkshire, United Kingdom. Last Activity: 18 Hours Ago Has been a member for 9-10 years. Has a total post count of 111. Received thanks 14 times, giving thanks to others 9 times.
    here's a similar thread
    http://www.mycncuk.com/threads/9147-...-gantry-design

    and a video showing the machine mentioned going through the motions (there are a few other videos from the same bloke )
    https://www.youtube.com/watch?v=9y7Y2abT-3M

    Cheers

  4. The Following User Says Thank You to Greeny For This Useful Post:


  5. #4
    Thanks for the links; so it can be made to work - that's one very industrial looking machine! If I was making a machine for cutting metal I'd be tempted to go that way, albeit with the Z slideway arrangement done slightly diffeently. I won't be doing it myself on the thing I'm designing at the mo. since having a conventional dangly Z-axis is actually of particular use to me when carving out large waveguides, since you can get the spindle down inside the workpiece to some extent.

Similar Threads

  1. B Axis indexing and easy workflow for repetitive cuts 4-axis
    By deemoss in forum General Discussion
    Replies: 1
    Last Post: 21-06-2017, 12:34 PM
  2. Replies: 9
    Last Post: 23-05-2015, 02:07 PM
  3. NEW MEMBER: Goal - Enable 3-Axis CNC Bed Mill to Perform 5-Axis Milling
    By LoveLearn in forum New Member Introductions
    Replies: 2
    Last Post: 25-01-2012, 08:46 PM
  4. Precision metal processing (3 axis, 5 axis, 7 axis) OEM
    By 7AxisCNC in forum Manufacturer News
    Replies: 0
    Last Post: 17-05-2011, 02:04 PM
  5. Which X Axis drive arrangement?
    By Glider in forum Linear & Rotary Motion
    Replies: 0
    Last Post: 28-02-2010, 11:05 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •