1. #1
    Hi, can someone please help me out. I have an old Roland 2300 which I would like to run on Mach3. Can anyone please let me know if itís possible to use the machines axis motors. Would it be possible to update the axis part but keep the machines spindle motor as is. If not. What breakout board would allow control of both axis and spindle. What psi would I need, and apart from the axis stepper drives what else is needed. Thanks. Michael

  2. #2
    In the event that no one here has done exactly that then photos, component details (including stepper labels, wiring etc.), and as much other technical info as you have would help anyone who hasn't done exactly this to help you ;-)

    Regards,
    Nick
    You think that's too expensive? You're not a Model Engineer are you? :D

  3. #3
    I did a Roland CAMM-3, wrote a new ROM and took control of all the steppers, buttons, twizzlers, lights, displays, bells and whistles. Good fun

Similar Threads

  1. CONVERSION: boxford vmc 300 mach3 conversion
    By bigred5765 in forum Conversion Build Logs
    Replies: 14
    Last Post: 05-07-2018, 06:05 PM
  2. ROLAND CAMM-2 PNC-2300A Conversion?
    By Chimestrike in forum Machine Discussion
    Replies: 23
    Last Post: 30-10-2016, 09:29 PM
  3. Boxford vmc260 to mach3 conversion
    By jamesgates1000 in forum Boxford Vertical Mills
    Replies: 14
    Last Post: 21-05-2015, 09:56 AM
  4. eBay: Denford Triac with Mach3 Conversion
    By large519 in forum Items On eBay UK
    Replies: 0
    Last Post: 29-04-2015, 05:34 PM
  5. Roland camm 2 pnc 2300 spindle upgrade help
    By iampete in forum Gantry/Router Machines & Building
    Replies: 0
    Last Post: 01-09-2014, 03:17 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •