1. #1
    Hi, the stepper motor on my router is playing up and needs replacing. The serial number is 85bygh450a-06. I can,t find any information for the motor or a seller. But as this is maybe a weak link in the machine I wonder if it would be better to replace the motor with a stronger one. The bed of the router is 5 foot 5 foot. With a lot of weight. What would be the best way to go. And what dealer to use. I am in the UK. Thanks. Itís a single phase machine running mach3 and 25v power supply

  2. #2
    Check out what the driver can do first, then work from there to identify the best Nema 34 motor for the job?
    You think that's too expensive? You're not a Model Engineer are you? :D

  3. #3
    Thanks for reply. It’s running from a longs company driver.DM860A. 2H driver

  4. #4
    Here you go -


    I'll stop Googling stuff now ;-)
    You think that's too expensive? You're not a Model Engineer are you? :D

  5. #5
    Thanks for taking the time

Similar Threads

  1. Stepper motor I.D anyone?
    By Nthkentman in forum Machine Discussion
    Replies: 2
    Last Post: 11-05-2015, 08:03 AM
  2. Replacing motor on small harmonic drive ?
    By fabhund in forum Gantry/Router Machines & Building
    Replies: 5
    Last Post: 23-12-2014, 12:28 PM
  3. How do I wire a stepper driver to a stepper motor?
    By swood1 in forum Stepper & Servo Motors
    Replies: 7
    Last Post: 21-09-2014, 05:40 PM
  4. Replies: 1
    Last Post: 16-03-2014, 07:29 PM
  5. Stepper motor help.
    By Kammo1 in forum Stepper & Servo Motors
    Replies: 4
    Last Post: 12-02-2010, 11:11 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts