Threaded View
-
06-11-2018 #1
I would be interested to know what this part would cost to manufacture, either machined or cast.
Initial quantity of 15 required, which could be bumped to 30 if this would drop the per part cost.
It is effectively a 20mm diameter cylinder with 30mm cylinders at each end, slightly offset in opposite directions. Overall length is 140mm.
As an alternative to machining, if anyone can do lost PLA casting, I can 3D print masters for use with the process.
The part was drawn in Fusion 360, so can presumably share the drawing if needed.
Adrian.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
machining Aluminium Tips?
By dfox1787 in forum Machine DiscussionReplies: 11Last Post: 26-05-2018, 11:15 AM -
RFQ: Aluminium machining
By TadasM in forum Projects, Jobs & RequestsReplies: 0Last Post: 07-02-2016, 01:54 PM -
machining aluminium with 1.5kW spindle
By routercnc in forum Spindles & Drive MotorsReplies: 13Last Post: 15-02-2014, 02:55 AM -
aluminium machining
By drumsticksplinter in forum Gantry/Router Machines & BuildingReplies: 8Last Post: 15-03-2013, 12:19 AM -
Machining Aluminium
By Steff in forum Metalwork DiscussionReplies: 7Last Post: 14-11-2012, 12:48 PM
Bookmarks