1. #1
    I would be interested to know what this part would cost to manufacture, either machined or cast.

    Initial quantity of 15 required, which could be bumped to 30 if this would drop the per part cost.

    Click image for larger version. 

Name:	DSCF4881a.jpg 
Views:	36 
Size:	69.5 KB 
ID:	25028

    It is effectively a 20mm diameter cylinder with 30mm cylinders at each end, slightly offset in opposite directions. Overall length is 140mm.

    As an alternative to machining, if anyone can do lost PLA casting, I can 3D print masters for use with the process.

    The part was drawn in Fusion 360, so can presumably share the drawing if needed.

    Adrian.

  2. The Following User Says Thank You to Saracen For This Useful Post:


Similar Threads

  1. machining Aluminium Tips?
    By dfox1787 in forum Machine Discussion
    Replies: 11
    Last Post: 26-05-2018, 11:15 AM
  2. RFQ: Aluminium machining
    By TadasM in forum Projects, Jobs & Requests
    Replies: 0
    Last Post: 07-02-2016, 01:54 PM
  3. machining aluminium with 1.5kW spindle
    By routercnc in forum Spindles & Drive Motors
    Replies: 13
    Last Post: 15-02-2014, 02:55 AM
  4. aluminium machining
    By drumsticksplinter in forum Gantry/Router Machines & Building
    Replies: 8
    Last Post: 15-03-2013, 12:19 AM
  5. Machining Aluminium
    By Steff in forum Metalwork Discussion
    Replies: 7
    Last Post: 14-11-2012, 12:48 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •