1. #1
    Hi, I have been looking at the uc400 board and have a few questions which I hope someone may know the answers to. The first is, will I be able to run a 64 bit computer with this board.
    Am I right in thinking that the uc400 still needs a breakout board in between it and the stepper drivers.
    I know it states it can work with mach3, is anyone running mach3 with this unit.
    Can I run spindle control with the uc400, if so how do I wire it up, what else will I need. Thanks, michael

  2. #2
    Quote Originally Posted by terry1956 View Post
    Hi, I have been looking at the uc400 board and have a few questions which I hope someone may know the answers to. The first is, will I be able to run a 64 bit computer with this board.
    Am I right in thinking that the uc400 still needs a breakout board in between it and the stepper drivers.
    I know it states it can work with mach3, is anyone running mach3 with this unit.
    Can I run spindle control with the uc400, if so how do I wire it up, what else will I need. Thanks, michael
    I don't see any question marks, but assuming you forgot them... all your questions have a yes answer. I suggest you register on the CNC Drive forum because it is more likely to get answers over there.

Similar Threads

  1. Bridgeport (loads of information)
    By Colin Barron in forum Bridgeport Milling Machines
    Replies: 0
    Last Post: 12-10-2016, 10:26 PM
  2. Welding magnets-any information?
    By ba99297 in forum Tool & Tooling Technology
    Replies: 7
    Last Post: 17-02-2016, 10:07 PM
  3. PCB probing information software
    By Daedelus in forum Computer Software
    Replies: 3
    Last Post: 31-03-2013, 09:28 PM
  4. Looking for information to help buy my first CNC machine
    By mholt1985 in forum Marketplace Discussion
    Replies: 12
    Last Post: 08-01-2012, 01:05 PM
  5. Replies: 1
    Last Post: 23-02-2009, 09:57 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •