1. #1
    m_c's Avatar
    Lives in East Lothian, United Kingdom. Last Activity: 10 Hours Ago Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,231. Received thanks 251 times, giving thanks to others 6 times.
    It's approaching that time of year where I need think about minimising next years tax bill, so a laser cutter is looking like a reasonable way to at least do some of that.

    Previous advise was don't get a red A4 one that runs moshidraw, as they're rubbish (well, that's the polite version of what the now departed John S said). Get a bigger A3 size blue and white one.

    Which brings me to the question of what wattage to get?
    60W or 80W?

    It will most likely be used for some metal engraving (both steel with suitable spray, and anodized alu), engraving wood, and cutting some thin plywood.
    Avoiding the rubbish customer service from AluminiumWarehouse since July '13.

  2. The Following User Says Thank You to m_c For This Useful Post:


Similar Threads

  1. Newbie - Help With Laser Cutting Speed And Power - 60W Laser
    By nickpscott in forum Laser Machines & Building
    Replies: 2
    Last Post: 11-11-2015, 10:07 PM
  2. Potentiometer problem on Chinese 40w laser.
    By andyisko in forum Laser Machines & Building
    Replies: 4
    Last Post: 13-10-2015, 08:19 PM
  3. Chinese 40W Laser vs. Plexiglas
    By Trispectiv in forum Laser Machines & Building
    Replies: 7
    Last Post: 01-02-2015, 06:20 PM
  4. Please to identify orange 6040 chinese laser engraver to get it working again!
    By itsmillertime in forum Laser Machines & Building
    Replies: 0
    Last Post: 26-01-2015, 08:54 PM
  5. Laser Diode Constant Current Driver
    By Mad Professor in forum General Electronics
    Replies: 8
    Last Post: 21-07-2010, 06:01 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •