. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    I have a control board out of a Denford Novamill and I believe a transformer was fried while doing some testing. I can't find a part number or a schematic for the board. The board says Baldor f391 issue 1 on it. Any info in finding a replacement part would be great thanks in advance

    Sent from my Pixel 2 using Tapatalk

  2. #2
    That's a shame as I threw one of those boards out about two weeks ago from a conversion I have just done.
    ..Clive
    The more you know, The better you know, How little you know

  3. #3
    That is too bad. If I can't fix this one I'm not opposed to doing a conversion. Could you let me know what you bought to replace it?

    Sent from my Pixel 2 using Tapatalk

  4. #4
    Quote Originally Posted by jasonvquick View Post
    That is too bad. If I can't fix this one I'm not opposed to doing a conversion. Could you let me know what you bought to replace it?

    Sent from my Pixel 2 using Tapatalk
    I used a Mesa 7i92 If I was doing it again I would use a Mesa 7i96 You you might not prefer Linixcnc
    ..Clive
    The more you know, The better you know, How little you know

  5. #5
    Update I replaced the board that was bad and now I have x y and z motion. I'm trying to get the spindle to come on and be controlled by the pot on the cabinet anyone have any advice?

    Sent from my Pixel 2 using Tapatalk

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Mach3 not finding csmio
    By terry1956 in forum CS-Lab (CSMIO)
    Replies: 0
    Last Post: 19-11-2018, 08:55 PM
  2. Finding center of box
    By dfox1787 in forum Artsoft Mach (3 & 4)
    Replies: 10
    Last Post: 13-03-2018, 01:55 AM
  3. Finding spindle suppliers in UK
    By freddi in forum Spindles & Drive Motors
    Replies: 1
    Last Post: 07-02-2017, 08:16 PM
  4. Edge Finding For Newbies
    By M250cnc in forum CAD & CAM Software
    Replies: 14
    Last Post: 01-03-2011, 10:55 AM
  5. Help with mach3 center finding script
    By eddie60 in forum Programmers Corner
    Replies: 7
    Last Post: 20-05-2009, 06:23 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •