1. #1
    Hi guys,

    I've built a CNC router table and have in the past had the axis moving but have never had it fully running, I have plenty of experience with the mechanical and operating side my electrical abilities are limited. I'm looking to HIRE someone willing to come to Southampton (SO45) area and help me build my controller and make sure that everything works. I have most of the parts for the controller and would like to run it on something like raspberry pi controller running universal G-code sender.
    Anyone interested in helping me out can contact me on lifeofriley26@gmail.com and we can go through how much you want, when you could do the job and what I need to buy for the project.



  2. The Following User Says Thank You to lifeofriley For This Useful Post:

Similar Threads

  1. BUILD LOG: Building a cnc router
    By fgfreek32 in forum DIY Router Build Logs
    Replies: 3
    Last Post: 14-04-2019, 07:30 PM
  2. NEW MEMBER: new member building a cnc router
    By steeplejack in forum New Member Introductions
    Replies: 1
    Last Post: 11-10-2017, 04:07 AM
  3. FOR SALE: For Sale: Unimatic 3 Axis Table & Controller
    By MarkT in forum Items For Sale
    Replies: 2
    Last Post: 02-11-2016, 07:39 PM
  4. Building a plasma table, need advice.
    By superclarkey in forum Plasma Table Machines
    Replies: 37
    Last Post: 20-09-2016, 03:57 PM
  5. Advise on building a CNC table
    By T0rnado69 in forum Gantry/Router Machines & Building
    Replies: 24
    Last Post: 30-06-2014, 10:19 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts