. .
  1. #1
    Have purchased a 1997 Colchester Tornado 80 and need some parts for it if anyone has any idea of where to get them.

    Need a belt for the Z axis, Part number: B346-1210, BELT 210L075.

    Also need new pad for the X axis brake if anyone knows where to get one.


  2. #2
    If you take the old belt in to your local industrial bearing, seal and belt supplier it's likely they will be able to identify it and source one for you if they don't have stock.
    Pads can be professionally re-lined if unavailable, there's a company in Sheffield which does it.
    You think that's too expensive? You're not a Model Engineer are you? :D

  3. #3
    Thanks for your reply I will try that. Or even was wondering if anywhere stocks new complete brakes. We have the brake working again by taking it apart and cleaning it all as it had been sitting a while but still drops 3-4mm when you switch it off so brake is not getting initial grab straight away.

  4. #4
    m_c's Avatar
    Lives in East Lothian, United Kingdom. Last Activity: 11 Hours Ago Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,748. Received thanks 332 times, giving thanks to others 8 times.
    Just search for 210L075 and you should get lots of potential suppliers for the belt. Its a 21" long, L (3/8" pitch) profile, 3/4" wide toothed belt.

    I'll bow to Nick's knowledge for pads though, as the only brake relines I've done have involved rivets.
    Avoiding the rubbish customer service from AluminiumWarehouse since July '13.

  5. #5
    Ok thanks very much! Got belt ordered there. Just to sort either pad for brake or complete new brake but the numbers have wore off it. I do have a parts manual though so will try about a few more people to see if they have any

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WANTED: Wanted Colchester/Tom Senior parts
    By lukecnc2012 in forum Items Wanted
    Replies: 3
    Last Post: 06-05-2015, 05:53 PM
  2. NEW MEMBER: Hello from Colchester
    By jay916 in forum New Member Introductions
    Replies: 1
    Last Post: 04-12-2010, 12:33 PM
  3. NEW MEMBER: Hello from Colchester, UK
    By jay916 in forum New Member Introductions
    Replies: 1
    Last Post: 04-12-2010, 12:31 PM
  4. NEW MEMBER: Hi all from Colchester
    By diyhero in forum New Member Introductions
    Replies: 1
    Last Post: 24-09-2010, 02:14 PM
  5. NEW MEMBER: Hello from Colchester
    By BillTodd in forum New Member Introductions
    Replies: 1
    Last Post: 23-12-2008, 09:02 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts