. .
  1. #1
    If I pick a 3d clip art object and place it down, run a roughing tool path it takes like .45 of material away around the object before it starts the roughing and finishing tool paths, why is that?

    see pic,
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	tool path.bmp 
Views:	82 
Size:	3.91 MB 
ID:	25556  

  2. The Following 2 Users Say Thank You to CrazyFloridian For This Useful Post:

  3. Depth that you place the object at is in the toolpath control section. best bet is go watch the Aspire videos as they do a very good job of explaining it. If you don't get a good grasp of it there, I would go on the vectric forum and ask there as you will get a much better explanation from the folks there. I use Aspire9.5 and while I am good at using it i am not the greatest at teaching it.

    CAD software Shark Pro v10, Also Aspire v9.0
    CAM Software Aspire v9.0, CamBam v1 beta12
    CNC Machine: http://www.mycncuk.com/threads/3661-...Second-machine
    3D printers: 2 x Prusa MK2S soon to be 2.5's and 1 x mini Delta (180 x 180)
    Work with Solid Surfaces, Acrylics, Woods, Foamboard, PLA, ASA, PMMA
    Work Computer: Lenovo D20, K4000, Tesla C2070, 64GB RAM


  4. The Following 2 Users Say Thank You to m.marino For This Useful Post:

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Kx1 profile
    By engineering.mvsb in forum Machine Discussion
    Replies: 0
    Last Post: 04-03-2019, 04:45 AM
  2. Carbon3D Breakthrough - CLIP 3D Printing Technology
    By Lee Roberts in forum 3D Printing Machines
    Replies: 0
    Last Post: 12-07-2015, 10:32 PM
  3. So what to do with this profile?
    By Rogue in forum Gantry/Router Machines & Building
    Replies: 1
    Last Post: 25-09-2012, 09:03 PM
  4. how to change a clip art
    By luke11cnc in forum Computer Software
    Replies: 6
    Last Post: 03-12-2011, 12:47 PM
  5. NEW MEMBER: profile
    By luke11cnc in forum New Member Introductions
    Replies: 1
    Last Post: 25-07-2011, 07:48 PM

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts