Page 2 of 2 FirstFirst 12
  1. #11
    Quote Originally Posted by RobC View Post
    Hello! Well I didn't rewire any in but I've just done so as an experiment and they trip the stop function no problem. So that got me thinking, I'll try wiring 24v straight across the E-stop and bypassing ground and that works fine so I've got that wired as such now to trip the E-stop.
    It is a good job those BoBs are cheap.
    Albert Einstein may have been a genius, but his brother Frank, was a monster

    Having just moved to Windows 10 (which is crap) My stress levels are through the roof !!!

  2. #12
    RobC's Avatar
    Lives in manchester, United Kingdom. Last Activity: 22 Hours Ago Has been a member for 1-2 years. Has a total post count of 50. Received thanks 10 times, giving thanks to others 4 times.
    I ordered a second one as a means of maybe outright swapping this one, other than that I'ts not been too bad! I've had endless issues with mach and it doing random things like stalling on a G21 command making me restart the program to solve it. Now you've got me working on putting in my limit switches again as I've been working on where I knew it would crash and then making my work well within such limits.

  3. #13
    I'm endlessly amused by the things Mach3 "refuses to do" :D
    You think that's too expensive? You're not a Model Engineer are you? :D

  4. #14
    RobC's Avatar
    Lives in manchester, United Kingdom. Last Activity: 22 Hours Ago Has been a member for 1-2 years. Has a total post count of 50. Received thanks 10 times, giving thanks to others 4 times.
    If I wasn't so broke with flying real planes I'd of long moved on from it, really fed up with the little issues I have with it!

  5. #15
    I use Mach3, all the issues I've ever had with it were about me, not about Mach3, which is the thrust of my comment :D

    My new machine has a Siemens controller, Servos and Drives ;-)
    You think that's too expensive? You're not a Model Engineer are you? :D

  6. #16
    Quote Originally Posted by RobC View Post
    If I wasn't so broke with flying real planes I'd of long moved on from it, really fed up with the little issues I have with it!
    I don't think that your problem is Mach3 but your own wiring or the configuration of Mach3.

    Btw I stopped flying real planes about 10 years ago... but my CNC is working fine...

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Looking for input
    By jtar40 in forum Motor Drivers & Controllers
    Replies: 0
    Last Post: 29-03-2018, 10:56 PM
  2. E-Stop input problem
    By eurikain in forum General Electronics
    Replies: 9
    Last Post: 21-02-2016, 07:31 PM
  3. New build Ė input/comments appreciated
    By ngundtoft in forum Gantry/Router Machines & Building
    Replies: 73
    Last Post: 05-10-2015, 10:38 AM
  4. Help re electrical input
    By Jomach21 in forum Motor Drivers & Controllers
    Replies: 1
    Last Post: 08-06-2015, 11:30 AM
  5. Haunyang VFD input voltage
    By JamesUS in forum Spindles & Drive Motors
    Replies: 0
    Last Post: 18-01-2015, 07:25 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •