Hi,

I start building the Optimum BF20L based on Robocnc plans.

Electronics that will used are from CNCDRIVE, 250W servo motors on X-Y, 400W on Z, 1.2KW power supply and UCCNC S/W.
Direct drive and i will try to open oil pockets.

Click image for larger version.  Name: IMG_2004.jpg  Views: 300  Size: 391.8 KB  ID: 25663
Click image for larger version.  Name: IMG_2005.jpg  Views: 296  Size: 281.4 KB  ID: 25664