1. #1
    This CNC lathe system needs to be completed to get it fully operational (it is all working but not fully integrated) and I really don't have the time or the enthusiasm (let alone space) so I will offer it for sale.
    The system is based on the Myford ML10 lathe and was called the Conect 121. This system, however, is different and has replaced NEMA motors and can be used in manual mode as well. It runs off a System 45 CNC controller and all appears OK - ie I can jog the carriage and cross slide in both directions but I have not had time to check all the settings with MACH3.
    I am listing the parts individually just in case someone is after certain parts or wants to install their own electronics. All parts are working but need a little more adjustment.

    The machine has ballscrews installed with covers.

    Myford with NEMA's ballscrews, cross slide etc, tailstock and relevant parts £495.00 (VGC)

    Myford ML10 cabinet stand £195.00 (VGC)

    System 45 CNC system with X&Z axes £195.00 (as new) (It is 2 axis and also has a speed controller board that I have not tried)

    3 Phase inverter and 1HP motor £120.00 (as new) (I have connected this to the motor and it works very well)

    PC unit for above can be supplied but will require a screen.

    Let me know if you require any specific photographs - which I will take at the weekend.

    The price for the complete system is £900.00

    Regards, Matt

    (Based just south of Yeovil, Somerset)

    Click image for larger version. 

Name:	DSCF1020.jpg 
Views:	53 
Size:	202.4 KB 
ID:	25821
    Click image for larger version. 

Name:	DSCF1021.jpg 
Views:	46 
Size:	140.7 KB 
ID:	25822
    Click image for larger version. 

Name:	DSCF1023.jpg 
Views:	48 
Size:	141.4 KB 
ID:	25823
    Click image for larger version. 

Name:	DSCF1027.jpg 
Views:	50 
Size:	175.3 KB 
ID:	25824
    Click image for larger version. 

Name:	DSCF1026.jpg 
Views:	56 
Size:	108.4 KB 
ID:	25825
    Click image for larger version. 

Name:	DSCF1022.jpg 
Views:	53 
Size:	132.9 KB 
ID:	25826
    Last edited by Clockworld; 01-06-2019 at 03:56 PM. Reason: add photos

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FOR SALE: Complete CNC plasma control system with THC from CandCNC.com
    By adscnc in forum Items For Sale
    Replies: 0
    Last Post: 09-12-2017, 12:06 PM
  2. Replies: 2
    Last Post: 27-01-2016, 01:05 PM
  3. FOR SALE: Gerber system 48 cnc router for sale
    By Ahmed in forum Items For Sale
    Replies: 0
    Last Post: 21-04-2015, 11:11 PM
  4. FOR SALE: Gerber System 48 Plus CNC Router For Sale
    By andyboy in forum Items For Sale
    Replies: 0
    Last Post: 28-11-2014, 09:27 AM
  5. FOR SALE: Gerber System 48+ Parts for sale
    By Chippit in forum Items For Sale
    Replies: 1
    Last Post: 17-09-2014, 04:54 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •