. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Hi all,
    After finishing my build, I have one metre of 20mm profile linear rail and two ballscrews around 400mm long. Will confirm ballscrews length when I get home but they're both 1605 and have the fixed bearing end machined. Other end is cut off. All of these were bought from Fred at BST Automation last year.

    Looking for a good home to a mycncuker. Would prefer if someone took it to use it rather than flog it.

    Just the ballscrews alone would be enough to do the X and Z axis on a small machine or mill.
    Last edited by Nealieboyee; 04-06-2019 at 01:16 PM.

  2. The Following User Says Thank You to Nealieboyee For This Useful Post:

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. BFT 20mm rail
    By driftspin in forum Gantry/Router Machines & Building
    Replies: 1
    Last Post: 10-08-2017, 07:02 AM
  2. WANTED: 20mm rail
    By johnsattuk in forum Items Wanted
    Replies: 2
    Last Post: 03-11-2015, 08:41 PM
  3. buying ball screws
    By bmbaz in forum Marketplace Discussion
    Replies: 2
    Last Post: 10-05-2014, 03:57 PM
  4. WANTED: 2 x 20mm Fully Supported Round Rail
    By longy in forum Items Wanted
    Replies: 0
    Last Post: 30-03-2014, 09:21 PM
  5. Best way to machine ball screws?
    By Ross77 in forum Lead Screws, Nuts & Supports
    Replies: 34
    Last Post: 17-06-2012, 05:10 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts