Help with .stl file

[johnsattuk]

I want to cnc a scaloped guitar fretboard, similar to the pics.

I can draw what I need in my ancient Acad but not generate a model or an stl file.

I wondered if anyone would be willing to generate a model and a file

[EddyCurrent]

Try this, Yngwie

Edit: this file was incorrect, the correct ones are attached to a more recent post below

[johnsattuk]

Many thanks, opens perfectly in Estlcam

Yngwie ? I wish, don't have a musical bone in my body, but do enjoy listening and watching him.

I belong to a men's shed and run a cnc router I built for them, there are several guitar makers there and they keep discovering the joys of CNCing

[cropwell]

Hi John,

Here's a guitar maker and player from Barrow-on-Soar who makes excellent guitars (without CNC) https://www.youtube.com/watch?v=gLzPD1ZQca0

Cheers,

Rob

[Ger21]

30 years ago, I built a guitar with a scalloped freetboard. I did it with files and sandpaper. :)

[johnsattuk]

30 years ago, I built a guitar with a scalloped freetboard. I did it with files and sandpaper. :)

I bet you used to cut up your plywood sheets with a handsaw

John

[johnsattuk]

Hi Eddy

Sorry to impose on your good nature, if possible could you do the same to these files, it has a different neck radius.

Funny lot these guitar makers

Hi Rob, won't open in my firefox browser