Page 3 of 3 FirstFirst 123
  1. #21
    Quote Originally Posted by Doddy View Post
    This image says a lot...

    Attachment 26141

    It's unclear from some of the other pictures, but this one is particularly interesting as it would appear to show the distortion on spokes projecting radially from the spiral centre, and at a position where the Y axis velocity is tending to zero or accelerating from zero. Is this true of other images? (they are less clear).

    Could this be related to torsional elasticity of the couplings/Ali extension bars on the Y-axis?, is it worth trying to drive the two belts separately with two steppers, and removing the length of Ali bar?

    Just a random thought
    This particular picture needs rotated 90 degrees. The "spokes" radiate in X direction (horizontal).
    ALL spiral cuts at ANY speed exhibit this same pattern. Lower the speed, closer the oscillations, making even through cuts difficult in those places due to increase in speed due to vibration. When on cutting speeds (10-20mmps) either kerf gets too wide (by increasing power beyond required for cutting) or not cutting through (power is set exactly right for cut through).

    I have replaced aluminium spiral couplers to spider couplers to no effect. The shaft that drives Y is 8mm bars, cant be that much windup in them.

    Also, the "spoke" pattern changes angle on changing speeds, but is always there and always radiate in spirals/circles. It makes a strong case for resonance vibration somewhere, i'm convinced that its the Y rail bolted into case. Being only 12mm and 750mm long it can act as an amplifier for vibration from motors... Hence me replacing Y.

    Quote Originally Posted by ericks View Post
    Yes ours at work also has a very nice rounded case and a small stand:)
    Obviously they would come out for repairs/maintenance but it's going to cost heaps!!
    Cost whom ? You or them ? If its you - whats the point for that 35k price :D

  2. #22
    ericks's Avatar
    Lives in ALDINGA BEACH, Australia. Last Activity: 6 Hours Ago Has been a member for 0-1 years. Has a total post count of 21. Received thanks 2 times, giving thanks to others 0 times.
    Yes our company will have to pay....
    Those tubes don't last forever

  3. #23
    Quote Originally Posted by ericks View Post
    Yes our company will have to pay....
    Those tubes don't last forever
    Replacing the tube is pretty straightforward, they are not that expensive in grand scheme of things. None of this warrants 35k in my opinion.

Page 3 of 3 FirstFirst 123

Thread Information

Users Browsing this Thread

There are currently 3 users browsing this thread. (0 members and 3 guests)

Similar Threads

  1. FOR SALE: AWC 608 Laser Cutter DSP
    By Philly in forum Items For Sale
    Replies: 1
    Last Post: 17-03-2017, 07:17 AM
  2. Is this a good Laser cutter
    By theceo in forum Woodwork Discussion
    Replies: 3
    Last Post: 06-04-2016, 04:18 PM
  3. eBay: Laser Cutter and Engraver
    By andyp in forum Items On eBay UK
    Replies: 0
    Last Post: 01-03-2016, 09:49 PM
  4. Laser cutter
    By John S in forum Laser Machines & Building
    Replies: 8
    Last Post: 02-06-2012, 01:16 PM
  5. WANTED: GCc Laser Pro or Epilog Laser Cutter Machine
    By Brownhills school in forum Items Wanted
    Replies: 1
    Last Post: 10-05-2012, 03:30 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •