Thread: OPT laser
Threaded View
-
25-06-2019 #1
Hi all,
I have recently finished building my cnc router it is controlled by a Geckodrive G540 and Mach3 software .I have recently purchased a Opt laser kit PLH3D 6W XF . I have spent many hours trying to get it working but to no avail any help would be brilliant.I run the VFD manually so I intended to use spindle run / speed through Mach3 to control laser output.There are five wires going into laser White Analog input 0-5V , Grey TTL in 0-24V , Yellow Analog / TTL ground ,Green ,ground ,Brown Vcc 12-24V .i have connected yellow to pin 7 on main terminal block on g540 ,White to pin 8 ,and a blue spur from white wire to pin 9 .The way I understand it the input is either TTL or PWM so one wire will be redundant.
I will attach g540 and laser manual if requested .but they are available on websites.many thanks for looking.regards Phil.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
laser
By kwsb246 in forum Laser Machines & BuildingReplies: 1Last Post: 05-04-2019, 12:47 PM -
Newbie - Help With Laser Cutting Speed And Power - 60W Laser
By nickpscott in forum Laser Machines & BuildingReplies: 2Last Post: 11-11-2015, 10:07 PM -
FOR SALE: K40 laser not working (laser fires)
By calida in forum Items For SaleReplies: 0Last Post: 31-03-2015, 08:45 PM -
WANTED: GCc Laser Pro or Epilog Laser Cutter Machine
By Brownhills school in forum Items WantedReplies: 1Last Post: 10-05-2012, 04:30 PM -
help with cnc laser
By swinds in forum Laser Machines & BuildingReplies: 11Last Post: 09-01-2012, 10:15 PM
Bookmarks